Modix

Modix BIG-180X V4 3D Printer

$32725.00
$32725.00
Sale
Packages

PLEASE NOTE:  SPECIAL ORDER DELIVERY - 6-12 week delivery timeframe

Modix BIG-180X 3D printer was first introduced in late 2019.  Similar to BIG-60, it has all the latest components of Generation 4 and enjoys the same level of modular offering to better match your needs and budget.

BIG-180X Specifications:

Here are a few of the BIG-180X unique specifications:

  • Print Volume: 1,800 x 600 x 600mm (XYZ)
  • Printer Dimensions:  2,630 x 1,060 x 1,573mm
  • Machine Size (WxDxH):  2,630×1,060×1,573mm
  • Shipping Weight:  210kg
  • Build it yourself:  self assembly kit
  • Print Head: single Griffin extruder, 1.75mm filament
  • IDEX:  Secondary print head –  Available on 3 models 
    • Stock with IDEX
    • Recommended 
    • Kitchen Sink
  • Duet3D Wifi 32 bit controller & Duex5 Expansion board
  • 4 X Z axis motors are controlled individually providing automatic bed tilt calibration
  • 100 probing point for automatic bed leveling
  • Minimal Electricity requirements –  single phase, 208-240V:
    • EU/AU/UK customers: IEC 309 32A Blue (2P+E) outlet
  • Price includes 12 months of warranty and lifetime support. Warranty does not include degradable (PEI sheet and nozzles) and consumables. Warranty can be extended up to two additional years
  • Enclosure:  included
  • Z Axis Guides:  Hiwin Rails included
  • DUEX Expansion Board:  Included
  • Tilt Screen & Emergency Button:  Optional
  • Casters:  Included

Chassis & Enclosure

  • Solid 40X40 T-slot aluminum profiles
  • Powder coated laser cut aluminum brackets and joints
  • Enclosure – Closed enclosure made of 3mm black Aluminum Composite Panels (ACP).  Enclosure is an optional add-on for BIG-60, BIG-120X & BIG-120Z and a default option for BIG-Meter and BIG-180X

Electronic Controller

Duet 2 WiFi, a powerful 3D Printer controller made in the UK.  Duet is a well known and widely supported electronic platform for professional 3D printers.  It is made by a respectful company and it is a major factor in our ability to provide ongoing high level of quality and reliability:

  • Powerful 32 Bit Processor
  • Dedicated WiFi module with external antenna
  • Quiet TMC2660 stepper drivers, up to 256 micro-stepping
  • High speed USD card and support for a second external SD card if required
  • Dual extruders controlled on the main board, up to 5 additional stepper motor drivers are controlled on the DUEX expansion board
  • High Power Rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A
  • Access the printer via a PC, tablet or smartphone on a local network
  • Set up and control your printer through the web interface

Fully Automated Calibration

All our printers’ models are delivered with the electronic expansion board named Duex. This allows allocating a dedicated driver per each motor for both Z axis and X axis. As a result, Modix is now offering a full set of automated calibrations routines including:

  • Bed tilting calibration
  • Bed leveling
  • Gantry alignment
  • Z offset calibration


Interfaces

Touch Screen- 7-inch Duet3D touchscreen – integrated with the controller

Web Interface  – WiFi web access for remote control from either mobile or PC allowing users to upload print files directly from their workstation


 

Griffin Print Head

Previously and optional upgrade and now is the default print head on all our printers, the new Griffin print-head is a major improvement to our offering.  It consists of a custom extruder made by Bondtech (based on the BMG model) and of a new hotend designed by Modix.  The new design comes default with every Modix printer and includes the following improvements:

High flow rate & high printing temperatures:  The Bondtech extruder provides a double drive-gear system that grabs the filament from both sides. The heat-block is made of nickel-coated copper, for an increased rate of heat transfer and compatibility with higher printing temperatures. The design includes the advanced Slice Engineering Bi-Metal heat-break that extends the melting zone inside the heat-block by being mostly made of copper as well. In addition, an upgraded PT-1000 temperature sensor enables printing in higher temperatures of up to 500°c. The hotend components are rated for 500°c and so far have been verified with printing of up to 340°c.

Higher reliability:  Large scale 3D printing usually involves the risk of the print-head scratching or crashing into the thick layer models resulting in bent or broken heat-breaks. The new print-head provides a rigid mounting of the heat-block, so it’s naturally more reliable and reduces these situations. The main reason for this is that the heat-block is now mounted on three faces instead of only one. It can withstand a much stronger impact thanks to this additional bracing. The longer-type Griffin High-Flow can also be attached to the rigid mounting as well.

Improved User Experience:  The new print-head design makes nozzle replacements easier. The rigid mounting of the heat-block allows one handed nozzle replacement, making it even easier to change to different nozzle diameters.

Easy Swap:  The design of the mounting bracket and the D shaft style of the Slice Engineering heat-break gives users the ability to replace the entire filament melting subsystem with ease. This will allow users to dedicate a complete setup for a specific filament type. i.e., keeping one setup for abrasive carbon filled filament and another for prototyping with PLA.

Compact Design:  The new design maintains the previous design benefits of compact design that preserves the generous Z-axis travel and is compatible with the vast offering of E3D Volcano nozzles coming in numerous sizes and materials.

Smart:  The new print-head allows automatic Z off-set calibration between the nozzle and the BL Touch probe. This is easier and more precise than the manual procedure. A dedicated sensor allows the BL-Touch and the nozzle to touch the surface, consequently. The precise relative distance between the probe and the nozzle (“Z-offset”) is saved automatically to the printer.

*The brass nozzle needs to be replaced with a higher-temperature capable nozzle as well for temperatures above 300c





Z off-set calibration tool


Improved Generation 4 Offering

With generation 4, all Modix 3D printers  are now shipped with the new Griffin print head, clog and crash detectors.


 

IDEX dual printing add-on


“IDEX” stands for independent dual extruder, where each extruder is capable of moving independently from each other. As a result, while the active extruder is printing, the second extruder is “parked” outside the printing area. Therefore, dual material printing made with IDEX technology comes out cleaner and with higher success ratios in comparison to other configurations as such the two print heads are installed side by side on the same carriage.

IDEX allows printing of advanced models that have internal geometries by using water-soluble filament. In addition, printing the dense support layers (interface layers between the model and the solid support structure) with a breakaway support filament, saves a lot of manual labor for support removal. In addition, since there is no need to keep air gap between the dense support and the model itself as normally happened when using the same material for support, the supported bottom surface of the models comes out clean and smooth. This saves a lot of time needed usually for sanding during the post process.

The IDEX is sold as an optional add-on for all generation 4 printers. includes:

  • Secondary printing subsystem: Griffin print head, clog detector, PTFE, spool mount
  • Motion system: secondary Y axis motor with the required components (belts, pulleys etc.)
  • Metal brackets for both Y axis and print heads
  • Wires, drag chains and optical end-stops
 

IDEX setup

Support in the interface layers only

 

Automatic Filament Changer

Modix’s IDEX can also be used as an automatic filament changer. When using the same filament on both print heads, the printer will be able to switch between the print heads automatically once one the printer detects a filament run-out.
Here are the benefits:

Get prints faster – One of the biggest challenges of 3D printing is the need to constantly monitor and maintain the printer. This can be especially frustrating when the machine has to sit idle overnight while waiting to be fed with a new filament spool. That’s where the Modix IDEX Filament Changer comes in. This clever technology allows the printer to switch out filament spools on its own, without having to pause its operation and wait. That means you can keep your printer running around the clock, without losing time on waiting for someone to service it.

Improved print quality – Not only does the Modix IDEX Filament Changer save you time, but it also helps to improve the quality of your prints. By not having to open the enclosure for service, the printer is able to maintain its chamber’s temperature, preventing the partly printed model from shrinking. This allows you to produce higher quality prints with fewer defects. If you want to take your 3D printing to the next level, be sure to check out the Modix IDEX add-on.



Griffin High-Flow Hotend

Griffin High-Flow Hotend is an optional add-on designed for customers who print large bulky objects and need to print fast. It is also an excellent choice for printing thick vase mode style objects since the single walled objects are stronger.

This add-on is provided with 80W heater and a thermistor. The new addition is now delivered with a mounting CNC made bracket. This mounting protects and stabilizes the long heatblock during printing. As a result it provides high print quality as vibrations are minimized during accelerations.

Includes:

Griffin HF Heat-block, 80W heater, PT-1000 Thermistor & 1mm nozzle

 

Modix BIG-180X V4 – The Ultimate Large-Format 3D Printer for Professionals

Unlock limitless possibilities with the Modix BIG-180X V4, a high-performance 3D printer machine designed for professionals who demand precision, automation, and an expansive build volume. Equipped with fully automated calibration, this best-in-class 3D printer ensures effortless operation while delivering exceptional print quality. Whether you're prototyping, manufacturing, or crafting large-scale designs, the BIG-180X V4 is the perfect tool to bring your vision to life.

Why Choose the Modix BIG-180X V4?

  • Fully Automated Calibration – Enjoy hands-free, precision tuning with automatic bed leveling and nozzle calibration for flawless prints.
  • Massive Build Volume – Create extra-large prints up to 1,800 x 600 x 600 mm, ideal for industrial-scale projects and detailed prototyping.
  • Industrial-Grade Performance – Built with premium components, including Hiwin linear rails, a rigid aluminum frame, and a powerful dual-drive extruder, ensuring stability and durability.
  • User-Friendly & Smart Interface – Features a responsive touchscreen, remote monitoring, and intuitive controls for seamless printing experiences.
  • Multi-Material & High-Speed Printing – Print with PLA, ABS, PETG, carbon fiber, and more at high speeds, while maintaining precision and accuracy.

Designed for Professionals & Industrial Applications

The Modix BIG-180X V4 is built for engineers, manufacturers, and product designers who need a highly reliable, large-format 3D printer for professional applications. With its fully automated calibration system, users can focus on innovation and productivity while the printer ensures optimal precision with minimal intervention. Whether you're creating large prototypes, functional parts, or intricate industrial designs, this cutting-edge 3D printer guarantees efficiency, accuracy, and outstanding print quality.

Upgrade your production with the Modix BIG-180X V4—where automation, precision, and large-scale capabilities redefine professional 3D printing. 🚀